Compression Moulding Machines

The compression moulding machines we offer are appreciated for their high quality and durability. We manufacture these as per the industrial standards by using high graded raw material and sophisticated machines. The various machines we offer are as follow:

Bakelite Moulding Machine

Ace Bakelite machine have higher standards in performance, more flexibility and more efficiency. Also, in order to cater in customer's different preferences, we can build custom-made moulding machines to fit customer needs.

Specification

Capacity/ Tons	Table Size(mm)	T Slot	Daylight	Cylinder	Rod Size	Stroke	Pressure	Power in HP	Working Height	Ejection cylinder dia	Ejection Stroke	Model Name
50	400 x 400	T 22	500	175	120	400	210	7.5	700	80	200	ACE-50HBM
75	450 x 450	T22	600	200	140	400	240	7.5	700	80	200	ACE-75HBM
110	500 x 500	T22	700	250	160	400	230	10	700	100	200	ACE-110HBM
150	600 x 600	T22	750	310	240	500	200	12.5	700	100	225	ACE-150HBM
200	700 x 700	T25	850	360	260	500	200	15	800	100	250	ACE-200HBM

Features

To produce consistent, accurate molding to close tolerances
Low maintenance costs
Comply with all safety requirements
Columns machined from heavy section steel for long working life
Final closing speed is fully adjustable
They are normally down-stroking so that the main ram and top table close initially under Gravity
Low wear, low friction pads bearing on wide 45° surfaces on the press columns guide. The moving table and eliminate lateral movement. This ensures consistently accurate molding to close tolerances with minimal use of tool dowels.
A central hydraulic power pack which drives a number of presses is also available
Manifold-mounted valves which conform to international standards ensure that the hydraulic circuit is shock free
High pressure Welded construction cylinder for rigid operation.

Send Enquiry

Dmc/Smc Moulding Machines

The DMC/SMC molding machines are widely appreciated by our clients in the domestic and international market. These machines are supplied to our clients after they are passed through the stringent quality tests. The various features and specifications are as follow:

• Construction: Closed frame/ Pillar
• Platens: 8 x 8 inches to 36 x 36 inches
• Operation: Manual/ PLC controlled

Send Enquiry

Rubber Molding Machines

Our Rubber Molding machine is very easy to operate. Build with quality materials, our rubber molding machines are economical and longer running life.

Specication

Model Name	Pressing Load	Platens in Inchs	Platens in mm	Heater Capacity	Piston Dia.	Ram Stroke	Daylight	Max. Pressure in Bar	Power in HP	Pump Type
ACE-RM-20	20	8 x 8	200 x 200	1.5 x 2	125	200	200	160	2	Gear
ACE-RM-35	35	10 x 10	250 x 250	1.5 x 2	150	200	200	200	3	Gear
ACE-RM-70	70	12 x 12	300 x 300	2 x 2	175	200	200	300	3	Van & plunger
ACE-RM-95	35	14 x 14	350 x 350	2.5 x 2	200	250	250	300	5	Van & plunger
ACE-RM-120	120	16 x 16	400 x 400	3 x 2	225	300	300	300	5	Van & plunger
ACE-RM-150	150	18 x 18	450 x 450	3.5 x 2	250	300	300	300	5	Van & plunger

Above Models are available in both Manual and PLC controlled Automatic Operation

Features

Large diameter Ram for uniform distribution of load
Single acting Gravity type cylinders
High speed operation for Higher production
Provision for adding Additional Presses
Rigid closed frame construction and four pillar construction
Adjustable micro speed processing for degassing

Send Enquiry

Vertical Plastic Injection Molding Press

Vertical injection moulding machine are economical simplified & high production machine used for plastic moulding component of different complex shape & size.

Size	300 mm frame size to 1000 mm
Type	(1) Single stage & multiple stage (2) H Frame & four pillar press (3) 10 MTon to 300 MTon

Send Enquiry

Vertical Plastic Injection Molding Press

Rubber Molding Press Line

Our Rubber Molding machine is very easy to operate. Build with quality materials, our rubber molding machines are economical and longer running life.

Specification

Model Name	Pressing Load	Platens in Inchs	Platens in mm	Heater Capacity	Piston Dia.	Ram Stroke	Daylight	Max. Pressure in Bar	Power in HP	Pump Type
ACE-RM-20	20	8 x 8	200 x 200	1.5 x 2	125	200	200	160	2	Gear
ACE-RM-35	35	10 x 10	250 x 250	1.5 x 2	150	200	200	200	3	Gear
ACE-RM-70	70	12 x 12	300 x 300	2 x 2	175	200	200	300	3	Van & plunger
ACE-RM-95	35	14 x 14	350 x 350	2.5 x 2	200	250	250	300	5	Van & plunger
ACE-RM-120	120	16 x 16	400 x 400	3 x 2	225	300	300	300	5	Van & plunger
ACE-RM-150	150	18 x 18	450 x 450	3.5 x 2	250	300	300	300	5	Van & plunger

Above Models are available in both Manual and PLC controlled Automatic Operation

Features

Large diameter Ram for uniform distribution of load
Single acting Gravity type cylinders
High speed operation for Higher production
Provision for adding Additional Presses
Rigid closed frame construction and four pillar construction
Adjustable micro speed processing for degassing.

Send Enquiry

Rubber Molding Press

Our Rubber Molding machine is very easy to operate. Build with quality materials, our rubber molding machines are economical and longer running life.

Specification

Model Name	Pressing Load	Platens in Inchs	Platens in mm	Heater Capacity	Piston Dia.	Ram Stroke	Daylight	Max. Pressure in Bar	Power in HP	Pump Type
ACE-RM-20	20	8 x 8	200 x 200	1.5 x 2	125	200	200	160	2	Gear
ACE-RM-35	35	10 x 10	250 x 250	1.5 x 2	150	200	200	200	3	Gear
ACE-RM-70	70	12 x 12	300 x 300	2 x 2	175	200	200	300	3	Van & plunger
ACE-RM-95	35	14 x 14	350 x 350	2.5 x 2	200	250	250	300	5	Van & plunger
ACE-RM-120	120	16 x 16	400 x 400	3 x 2	225	300	300	300	5	Van & plunger
ACE-RM-150	150	18 x 18	450 x 450	3.5 x 2	250	300	300	300	5	Van & plunger

Above Models are available in both Manual and PLC controlled Automatic Operation

Features

Large diameter Ram for uniform distribution of load
Single acting Gravity type cylinders
High speed operation for Higher production
Provision for adding Additional Presses
Rigid closed frame construction and four pillar construction
Adjustable micro speed processing for degassing.

Send Enquiry

Rubber Molding Press

Fully automatic two station three station and four station PLC control rubber moulding presses manufactured by us with common power pack have advance technique of auto degassing/ air breathing that helps in increasing production, improve quality & save manpower, save electric power, rejection time and space.

Send Enquiry

Rubber Molding Press

Our Rubber Molding machine is very easy to operate. Build with quality materials, our rubber molding machines are economical and longer running life.

Specification

Model Name	Pressing Load	Platens in Inch	Platens in mm	Heater Capacity	Piston Dia.	Ram Stroke	Daylight	Max. Pressure in Bar	Power in HP	Pump Type
ACE-RM-20	20	8 x 8	200 x 200	1.5 x 2	125	200	200	160	2	Gear
ACE-RM-35	35	10 x 10	250 x 250	1.5 x 2	150	200	200	200	3	Gear
ACE-RM-70	70	12 x 12	300 x 300	2 x 2	175	200	200	300	3	Van & plunger
ACE-RM-95	35	14 x 14	350 x 350	2.5 x 2	200	250	250	300	5	Van & plunger
ACE-RM-120	120	16 x 16	400 x 400	3 x 2	225	300	300	300	5	Van & plunger
ACE-RM-150	150	18 x 18	450 x 450	3.5 x 2	250	300	300	300	5	Van & plunger

Above Models are available in both Manual and PLC controlled Automatic Operation

Features

Large diameter Ram for uniform distribution of load
Single acting Gravity type cylinders
High speed operation for Higher production
Provision for adding Additional Presses
Rigid closed frame construction and four pillar construction
Adjustable micro speed processing for degassing.

Send Enquiry

Plastic Injection Molding Press

Vertical injection moulding machine are economical simplified & high production machine used for plastic moulding component of different complex shape & size.

Size	300 mm frame size to 1000 mm
Type	(1) Single stage & multiple stage (2) H Frame & four pillar press (3) 10 MTon to 300 MTon

Send Enquiry